4service NFC2.11.2 - App Store

Define. Transfer. Analyse.
Users of the 4service NFC app can configure and analyse Tridonic LED drivers with NFC interface free of charge.

Application

The 4service NFC app enables quick and easy configuration and analysis of Tridonic LED drivers. This makes the work of installation engineers, maintenance officers and employees in similar fields significantly easier.
Functions
The following functions can be configured via the app, provided they are supported by the respective Tridonic product.

Set the driver parameters:

- LED output current
Set the LED output current (in mA) to adjust the brightness
- Device operating mode
Selection of the device operating mode (DALI, corridorFUNCTION, chronoSTEP, etc.).
- DALI addressing
Set the DALI short address
- corridorFUNCTION
Configuration of the corridorFUNCTION (light level, fade times, etc.).
- chronoSTEP
Configuration of the chronoSTEP profiles
EZ easy addressing decoder
An addressing tool is available to convert the Bi-colour LED binary identification signal to a DALI address of between 0 to 63.
Easily transfer driver parameter settings
With the copy function, you can quickly and easily copy a device's settings to identical devices. This saves time when replacing faulty devices and when commissioning several identical luminaires.
Transfer configurations from deviceGENERATOR
With the app, configuration files that were created with the deviceGENERATOR (ending: *.trgf) can also be transferred on LED drivers.
Driver analysis
If an LED driver is faulty, the data memory can be readout. This means an initial analysis of the causes is already possible on site.
Product information
Retrieve further information about Tridonic products, simply scan the NFC tag or the QR code on Tridonic devices.
The following prerequisites must be met before you can use the app:

- Use of an LED driver with NFC interface from Tridonic.
- NFC reader with Bluetooth connection from FEIG ELECTRONIC or Tertium Technologies. Alternatively, the internal NFC reader can also be used on different smartphones.
- Active Internet connection for first-time use and for updates.
An Internet connection is not absolutely necessary for ongoing operation. To ensure that the app works properly, however, the device-specific data must always be current, i.e. regularly updated.
- If any of the driver's functions are protected by the luminaire manufacturer (e.g. by a password), these cannot be changed even with the app.
The 4service NFC app is itself is free of charge. But costs might be incurred for the required internet connection.

Version History - General improvements. 2.11.2 Sep 17 - New Sensor Mode function implementation
- Added support for US 1-10V drivers
- Improved user experience with the internal NFC antenna
- Improvement of driver information loading on first-time installation
- Security and general performance improvements 2.11.1 May 25 - New Sensor Mode function implementation
- Added support for US 1-10V drivers
- Improved user experience with the internal NFC antenna
- Improvement of driver information loading on first-time installation
- Security and general performance improvements 2.11.0 May 25 - Added support for a new version of Integrated DALI Power Supply.
- Enabled Application Protection in NFC Light and NFC PRO.
- Improved LED current readout presentation.
- Added in-app notifications for new versions and scheduled maintenance.
- Adjusted firmware and hardware version values for DALI protocol compliance.
- General improvements and bug fixes. 2.10.0 12/01/2025 - Fixed the issue that prevented the successful TRGF upload.
- Improved error messages to provide clearer and more user-friendly feedback. 2.9.1 07/22/2025 - [New Function] CLO and eCLO: In-app configuration for CLO (Constant Light Output) and eCLO.
- [New Function] DC Level: Configuring DC Level settings within the app,
- Bug Fixing and improvements: Addresses various bugs and minor issues to improve overall app stability and performance. 2.9.0 06/16/2025 - Improved support for chronoSTEP function 2.8.1 03/31/2025 - OTD Multichannel: Added the support of drivers with more than one channel and DT8 functionalities
- Multi GTIN: Introduced Group Programming for streamlined configuration.
- Integrated DALI Power Supply: Enabled integrated DALI power supply functionality.
- Reset Button Function: Implemented reset button function on all 4Service NFC functions.
- FEIG ECCO Smart: Optimized the connection process for improved performance. 2.8.0 01/27/2025 - Improve NFC readout
- Stability improvements 2.7.3 12/17/2024 What's new:
-Improved the download process for app data to prevent the update from failing. 2.7.2 10/29/2024 What's new:
-[New Feature] Lifetime Indicator
-Improved NFC Tag readout
-General stability improvements and bug fixing 2.7.1 08/23/2024 What's new:
-[New Feature] Lifetime Analytics
-Improved NFC Tag readout
-General stability improvements and bug fixing 2.7.0 08/19/2024 Thanks for using 4service NFC!
We're busy making your experience better!

What's new?

- Stability improvements related with the copy function 2.6.0 06/05/2024 Thanks for using 4service NFC!
We're busy making your experience better!

What's new?

Added Support for chronoSTEP+ and improved the look and feel.

Fixed a bug where in rare cases the App crashed if you tried to change the chronoSTEP function.

Fixed a displaying error in the device information area. 2.5.1 06/27/2023 Thanks for using 4service NFC!
We're busy making your experience better!

What's new?

Added Support for chronoSTEP+ and improved the look and feel.

Fixed a bug where in rare cases the App crashed if you tried to change the chronoSTEP function.

Fixed a displaying error in the device information area. 2.5.0 06/13/2023 Thanks for using 4service NFC!
We're busy making your experience better!

What's new?

Support of FEIG Electronic NFC scanners (ID ECCO Smart HF-BLE and ID ECCO Smart 2D-HF-BLE).
Show the percentage of the reduction times in the chronoSTEP function.
General stability improvements to bug fixing. 2.4.0 11/30/2022 Thanks for using 4service NFC!
We're busy making your experience better!

What's new?

Support the new Tertium NFC scanner (BlueBerry LE HF).
Support a new NFC interface - NFC PWM Linear - allowing to program the new drivers EXC3 that will be launched to the market.
Driver FW version is now readout on the app (via NFC).
General stability improvements to bug fixing. 2.3.1 07/05/2022 Thanks for using 4service NFC!
We're busy making your experience better!

What's new?

Support the new Tertium NFC scanner (BlueBerry LE HF).
Support a new NFC interface - NFC PWM Linear - allowing to programm the new drivers EXC3 that will be launched to the market.
Driver FW version is now readout on the app (via NFC).
General stability improvements to bug fixing. 2.3.0 07/04/2022 Thanks for using 4service NFC!
We're busy making your experience better!
We've made stability improvements to the app and fixed a bug. 2.1.4 03/14/2022 We have excellent news for all our users. The in-app purchases have been removed, and the 4service NFC app is now for free. 2.1.3 02/02/2022 Thanks for using 4service NFC!
We’re busy making your experience better!

Here are a couple of enhancements you'll find in this update:
- Support of iPhone internal NFC-Reader. The minimum requirements to readout and program with the internal antenna on iOS are as follows: iPhone 7 or newer and iOS 13 or newer
- Emergency luminaire easy addressing (EZ) LED binary identification converter to a DALI address is now available on the home screen
- Improved usability when using an external NFC reader

We've made stability improvements to the app and fixed a few bugs:
- General stability fixes and improvements 2.0.0 12/20/2021 Thanks for using 4service NFC.
We’re busy making your experience better.

The update contains the following enhancements:
- Fixed an issue that prevented the app from scanning QR codes 1.7.4 06/14/2021 Thanks for using 4service NFC.
We’re busy making your experience better.

The update contains the following enhancements:
- Luminaire information (DALI Part 251) added
- deviceANALYSER no longer displays duplicate entries
- Stability improvements 1.7.2 06/08/2021 Thanks for using 4service NFC!
We’re busy making your experience better!

Now supporting Tertium Reader NFC v2.0.4. 1.5.3 08/26/2020 Thanks for using 4service NFC!
We’re busy making your experience better!

Here are a couple of enhancements you'll find in the latest update:
- Pre-generated deviceGENERATOR files (.trgf) can be loaded into the driver.
- Automatic read/write if NFC tag is in field
- App supports now basic deviceANALYSER function

We've made stability improvements to the app and fixed a few bugs:
- General stability fixes and improvements 1.5.0 04/28/2020